Panasonic WJ-HD309 manual 100, Event Function for Events

■[Event] Function for Events

Perform the settings for event actions of each event type (motion detection, video loss, command alarm and terminal alarm).

SETUP MENU	Maintenance	Recording	Event	Schedule		LIVE
	Switcher	Display	Comm		System
	■ VMD
Event Setup					SETUP
	■ Video Loss
VMD Setup					SETUP
	■ Terminal/Command Alarm				SETUP
Alarm Setup

Terminal Setup

●[Event Setup] Settings for the alarm output duration and the buzzer duration

Perform the settings for the alarm output duration and the buzzer sound duration for each event type (motion detec- tion, video loss, command alarm and terminal alarm).

SETUP MENU	Maintenance	Recording		Schedule		LIVE
	Switcher	Display	Comm		System
	■ VMD
Event Setup					SETUP
	■ Video Loss
VMD Setup	■ Terminal/Command Alarm				SETUP
					SETUP
Alarm Setup

Terminal Setup

SETUP MENU
	Maintenance	Recording		Schedule	LIVE
	Switcher	Display	Comm	System
	■ VMD
Event Setup				SETUP
VMD Setup	■ Video Loss Setup			SETUP
	■ Terminal/Command Alarm Setup
Alarm Setup				SETUP
	■ Alarm Output		1 0 s
Terminal Setup	■ Buzzer		1 0 s
		O K	CANCEL

The following are available for the buzzer sound duration. When OFF is selected, a buzzer will not sound.

(s: second, m: minute)

OFF: The buzzer will not sound.

1 s - 30 s (in 1 second intervals) /40 s/50 s/1 m/2 m/3 m/4 m/5 m

EXT: The buzzer will continue until the ALARM RESET but- ton is pressed.

●[VMD Setup] Perform the settings for the motion detection function

Select ON or OFF to determine whether to enable or dis- able the motion detection function for each camera chan- nel.

When ON is selected, perform the settings for the motion detection area for each camera channel. Up to 4 areas can be set for a camera channel for the detection area. Refer to page 45 for further information about the motion detection function.

SETUP MENU	Maintenance	Recording	Event	Schedule	LIVE
	Switcher	Display	Comm	System
	■ CAM1
Event Setup				ON
	■ CAM2			OFF
VMD Setup
	■ CAM3			OFF
Alarm Setup	■ CAM4
				OFF
Terminal Setup	■ CAM5			OFF
	■ CAM6			OFF
	■ CAM7			OFF
	■ CAM8			OFF
	■ CAM9			OFF
	■ CAM10			OFF
	■ CAM11			OFF
	■ CAM12			OFF
	■ CAM13			OFF
	■ CAM14			OFF
	■ CAM15			OFF
	■ CAM16

The following are available for the alarm output duration. When OFF is selected, the alarm output will not be sup- plied.

(s: second, m: minute)

OFF: No alarm output is supplied. 1 s - 30 s (in 1 second intervals) /40 s/50 s/1 m/2 m/3 m/4 m/5 m

EXT: Alarm output will continue until the ALARM RESET button is pressed.

Important:

The alarm output duration cannot be set for video loss. Signals will be supplied continuously from the camera error output terminal (pin no. 17) of the ALARM/CON- TROL connector on the rear panel during the period when the video signal is lost. (Refer to page 83.)

[Screenshot 1]

Start operation from the camera channel selection menu of the "VMD Setup" window.

SETUP MENU
	Maintenance	Recording		Schedule		LIVE
	Switcher	Display	Comm		System
	■ CAM1
Event Setup					ON
	■ CAM2				OFF
VMD Setup
	■ CAM3				OFF
Alarm Setup	■ CAM4
					OFF
Terminal Setup	■ CAM5				OFF
	■ CAM6				OFF
	■ CAM7				OFF
	■ CAM8				OFF
	■ CAM9				OFF
	■ CAM10				OFF
	■ CAM11				OFF
	■ CAM12				OFF
	■ CAM13				OFF
	■ CAM14				OFF
	■ CAM15				OFF
	■ CAM16

z Rotate the jog dial to select ON for a desired camera channel for which the motion detection function is to be applied, and press the SET button.

100