Panasonic WJ-HD309 manual 113, Display, OSD Setup, Camera Title

■ [Display]

Perform the display settings for monitors 1 and 2 connected	[Screenshot 2]
to the unit.	The camera title pop-up window will be displayed.

SETUP MENU	Maintenance	Recording	Event	Schedule	SETUP MENU	Maintenance	Recording	Event	Schedule
					LIVE

Switcher Display Comm System Switcher Display Comm System

OSD Setup	■ Camera Title	SETUP	OSD Setup	■ Camera Title	SETUP
Monitor 1	■ Time & Date Display Position	L-UPPER	Monitor 1	■
	■ Camera Title Display Position	R-LOWER		CAM1
				■ Camera
Monitor 2	■ Line Color on the Multi Screen	WHITE	Monitor 2	CAM2
				■ Line
				CAM3
				CAM4
				CAM5
				CAM6
				CAM7
				CAM8
				OK	CANCEL

LIVE

xMove the cursor to "CAM1" using the arrows button.

●OSD Setup

Perform the On Screen Display settings for monitor 1 and	[Screenshot 3]
	The cursor moves to " CAM1".
monitor 2 such as the settings of camera titles or the set-
tings of the time display position.
	SETUP MENU
		Maintenance	Recording	Event	Schedule
		Switcher	Display	Comm	System

SETUP MENU	Maintenance	Recording	Event	Schedule		OSD Setup	CAM1	■	CAM1
	Switcher	Display	Comm	System	LIVE	Monitor 1	CAM2	■	CAM2
								■
OSD Setup	■ Camera Title			SETUP		Monitor 2	CAM3	■	CAM3
							CAM4		CAM4
	■ Time & Date Display Position			L-UPPER
Monitor 1							CAM5		CAM5
	■ Camera Title Display Position			R-LOWER
Monitor 2	■ Line Color on the Multi Screen			WHITE			CAM6		CAM6
							CAM7		CAM7
							CAM8		CAM8

OK CANCEL

LIVE

8Camera Title

Perform the settings for the camera title. It is possible to display a camera title on the monitor 1/monitor 2, and record it as a part of the recorded image (page 98). Do the following to set the camera title.

[Screenshot 1]

Start operation from the "OSD Setup" menu.

SETUP MENU	Maintenance	Recording	Event	Schedule	LIVE
	Switcher	Display	Comm	System
	■ Camera Title
OSD Setup				SETUP
	■ Time & Date Display Position			L-UPPER
Monitor 1
	■ Camera Title Display Position			R-LOWER
Monitor 2	■ Line Color on the Multi Screen			WHITE

zMove the cursor to "Camera Title" using the arrows but- ton (C D) and press the SET button.

cSelect a character to be entered by rotating the jog dial. Up to 16 characters can be entered.

vMove the cursor to the right side of the entered charac- ter using the arrows button.

Repeat steps 3 and 4 to enter the camera title.

Notes:

•To correct the entered characters, move the cursor to the character to be corrected and press the STOP button to delete it. Enter a correct character after deleting.

•To copy the camera title that has been set for another camera channel, follow the procedure below.

1.Move the cursor to "CAM 1" in step 2 on the pre- vious page and press the SET button. The fol- lowing screen will be displayed.

SETUP■MENUCopy Another Camera Title					CAM2	Schedule
		Maintenance		Record ng	Event
	CAM1		CAM1			LIVE
	CAM2	■	CAM2			SETUP
Common Setup
Monitor 1	CAM3	■ CAM3
	CAM4		CAM4	O K	CANCEL
Monitor 2	CAM5		CAM5
	CAM6		CAM6
	CAM7		CAM7
	CAM8		CAM8
					OK	CANCEL

2.Select the camera channel for which the cam- era title is to be copied by rotating the jog dial.

113