Panasonic WJ-HD309 manual 117, RS485 Setup Settings for RS485

8Baud Rate

Select the communication speed for data transmission with a connected device from the following.

2 400/4 800/9 600/19 200/38 400 bps

8Data Bit

It is impossible to change the value for this setting. 8 bit

8Parity

Select a method to check a transmission error at communi- cation from the following.

NONE: No parity check

EVEN: Even parity

ODD: Odd parity

8Stop Bit

Select a stop bit from the following. 1 bit/2 bit

8Retry Timing

Select a retransmission interval for when data reception is not confirmed from the following.

OFF/100 ms/200 ms/400 ms/1 000 ms

8Alarm Data

Select a method to inform the connected controller of an event occurrence from the following.

OFF: Does not function.

0 s: Informs the controller every time an event is detected.

1 s/5 s: Informs the controller when a specified time has passed after detecting an event.

8Camera Number Setup

It is possible to assign a number to each camera channel to operate cameras using the controller compatible with PS·Data.

Do the following to assign numbers to the camera chan- nels.

[Screenshot 1]

Start operation from the "PS·Data Setup" menu.

SETUP MENU
	Maintenance	Recording	Event	Schedule		LIVE
	Switcher	Display	Comm		System
	■ Unit Address(System)
Camera Control					001
	■ Unit Address(Controller)				001
PS.DATA Setup
	■ Cascade				OFF
RS485 Setup
	■ Baud Rate				9600
RS232C Setup	■ Data Bit			8
NW Setup 1	■ Parity				NONE
NW Setup 2	■ Stop Bit				1
	■ Retry Timing				OFF
NTP Setup
	■ Alarm Data				1s
	■ Camera Number Setup				SETUP

z Move the cursor to "Camera Number Setup" using the arrows button (C D) and press the SET button.

[Screenshot 2]

The "Camera Number Setup" pop-up window will be dis- played.

SETUP MENU
		Maintenance			Recording	Event	Schedule	LIVE
		Switcher			Display	Comm	System
	Control■ Camera■ UnitNumberAdress(System)Setup						001
Camera
	SetupCAM PORT			CAM NO.		CAM PORT	CAM NO.
PS.DATA
RS485 Setup		1	Cascade		001	9	009
RS232C	Setup	2			002	10	010
		3			003	11	011
NW Setup	1
NW Setup	2	4			004	12	012
NTP Setup		5			005	13	013
		6			006	Setup 14	014
			Camera
		7			007	15	015
		8			008	16	016
						O K	CANCEL

xMove the cursor to a desired "CAM No." of "CAM PORT" using the arrows button.

[Screenshot 3]

The cursor will move to the selected "CAM No." of "CAM PORT".

SETUP MENU			Maintenance			Recording	Event	Schedule	LIVE
			Switcher			Display	Comm	System
		Control■ Camera■ UnitNumberAdress(System)Setup						001
Camera
		SetupCAM PORT			CAM NO.		CAM PORT	CAM NO.
PS.DATA
RS485 Setup			1	Cascade		001	9	009
RS232C	Setup		2			002	10	010
			3			003	11	011
NW Setup		1
NW Setup		2	4			004	12	012
NTP Setup			5			005	13	013
			6			006	Setup 14	014
				Camera
			7			007	15	015
			8			008	16	016
							O K	CANCEL

cSelect a camera number by rotating the jog dial. Repeat steps 2 and 3 to assign camera numbers to the other CAM PORT.

v Move the cursor to "OK" using the arrows button and press the SET button.

→Camera numbers will be assigned and the "Camera Number Setup" menu will be closed.

Note: When you move the cursor to "CANCEL" in step 4 and press the SET button, the settings will be can- celed and the "Camera Number Setup" menu will be closed.

●[RS485 Setup] Settings for RS485

Perform the following settings for RS485.

SETUP MENU	Maintenance	Recording	Event	Schedule	LIVE
	Switcher	Display	Comm	System
	■ Baud Rate
Camera Control				19200
PS.DATA Setup	■ Control Camera CH			SETUP
	■ Data Bit			8
RS485 Setup	■ Parity			NONE
RS232C Setup	■ Stop Bit			1

NW Setup 1

NW Setup 2

NTP Setup

117