Panasonic WJ-HD309 2Zoom, Focus, a B Repeat Button ZOOM/FOCUS, 3Iris, Listing Button IRIS, Listed

When the shift button is lit, these buttons work as the toggled function buttons.

(The buttons available as the toggled function buttons will light green when the shift button is lit.)

!1Pan, Tilt, Latest Recorded Image Playback Button (PAN/TILT, GO TO LAST)

Pans/tilts the selected camera, or plays back the latest recorded image.

(Refer to pages 41 and 23 respectively.)

!2Zoom, Focus, A - B Repeat Button (ZOOM/FOCUS,

A-B REPEAT)

Zooms in/out, adjusts focus, or repeats playback of recorded images between two designated points. (Refer to pages 41 and 24 respectively.)

!3Iris, Listing Button (IRIS, LISTED)

Adjusts iris, or enables/disables the filtering playback. (Refer to pages 42 and 28 respectively.)

!4Preset, Auto Function Button (PRESET/AUTO)

Moves a camera to the preset position, or activates the auto function of the camera.

(Refer to pages 42 and 44 respectively.)

!5Stop Button (STOP)

Stops playback.

!6Play/Pause Button (PLAY/PAUSE)

Plays recorded images, or pauses playback.

!7Record Button (REC/REC STOP)

Starts recording. To stop recording, press this button down for 2 seconds or more.

!8Slow Button (SLOW)

Pans/tilts the selected camera slowly.

!9Search Button (SEARCH)

Displays the search menu.

@0Setup, Escape Button (SETUP/ESC)

Displays the setup menu, or turns back to the previous page of the setup menu, etc.

@1Busy Indicator (BUSY)

Lights when the selected camera was not available to operate because another user is operating it using a controller or a PC via a network. In this case, wait until this indicator goes off.

@2Arrow Buttons (CDAB)

Adjusts zooming/focus, or moves the cursor on the setup menus and the search menu.

@3Set Button (SET)

Works differently depending on the situations listed below:

•Plays recorded images at the current playback speed when this button is pressed during fast playback.

•Registers preset positions of cameras.

•Activates the auto focus function.

•Sets the alarm suspension mode on/off.

•Determines the setting of parameters on the setup menus.

@4Jog Dial

Works differently depending on the situations as fol- lows:

•Plays recorded images frame by frame when this dial is rotated during pausing playback.

•Skips playback time when this dial is rotated during playback at normal speed.

•Moves the cursor on the search menu or the thumbnail menu.

•Selects a parameter setting or a character on the setup menus.

@5Shuttle Ring

Works differently depending on the situations as fol- lows:

•Plays fast when this dial is rotated during playback at normal speed.

•Turns the search menu pages or the thumbnail menu pages.

@6Connectors Cover

@7Copy Port (COPY2)

Connect a recommended external recording device to this port.

@8S-Video Output Connector (S-VIDEO)

Connect the S-video input connector of a VTR with this connector. The same video signal supplied to the MON- ITOR OUT2 connector on the rear panel will be sup- plied to this connector.

@9Video Output Connector (VIDEO OUT)

Connect the video input connector of a VTR with this connector. The same video signal supplied to the MON- ITOR OUT2 connector on the rear panel will be sup- plied to this connector.

#0Audio Output Connector (AUDIO OUT)

This connector, for an RCA standard jack, supplies an unbalanced –10 dBV, 600 Ω line output audio signal to an external device.

Recorded audio will be supplied from this connector during playback.

The same audio signal supplied to the AUDIO OUT connector on the rear panel will be supplied to this con- nector.

8