Panasonic WJ-ND300A When the Error Log is Displayed, Error Log Indication on Description Solution

When the Error Log is Displayed

Do the following when the error log is displayed on the LCD.

Error Log	Indication on the	Description	Solution
	LCD

W-ERR u-d

R-ERR u-d

SKIP u-d

Failed to write/read data on the HDD.

The HDD may be malfunc- tioning.

If this error occurs frequently, contact the dealer to replace the HDD. (*1)

HDu-d 1DOWN	HDD-10 ERR	A HDD of RAID is failed.	Contact the dealer.
	RAID5 1DOWN		After recovering/replacing the faulty disk, the
			error status will be canceled.
HDu 2DOWN
	Please Setup on	The unit is currently inoper-	Display "DISK CONFIG MENU" and initial-
	DISK CONFIG	able since the disk array is	ize or replace the hard disk.
	MENU	changed.
SMART u-d	HDD-1-u-d ERR	The HDD may be malfunc-	Contact the dealer to replace the HDD. (*1)
	HDD WARNING	tioning and may work incor-
		rectly.

H.METER u-d	HDD-2-u-d ERR	The set time for the hour
	HDD HOUR METER	meter has passed.
		It may be reaching the end
		of the HDD’s lifetime.

If this error occurs frequently, contact the dealer to replace the HDD. (*1)

V-ERROR vvv	Data on each recording
	area is lost by the
	"REMOVE" error, etc.

Contact the dealer.

After replacing the faulty disk, the error sta- tus will be canceled. (*1)

REMOVE u-d	HDD-3-u-d ERR	The HDD has been
	HDD REMOVED	unmounted from the system
		automatically.

Contact the dealer.

After replacing the faulty disk, the error sta- tus will be canceled. (*1)

EVT-**% or	HDD-5ERR	The HDD is almost full or	Initialize or replace the HDD. (*1)
EVT-FULL	EVENT-HDD FULL	completely full.
CPY-**% or	HDD-6ERR
CPY-FULL	COPY-HDD FULL
CAM cc ERR	NET-3-0ERR	Communication with the	Check the communication status between
	CAMERA cc ERROR network camera is unstable,		this unit and the network camera.
		or no network camera is
		connected.
LINK_ERR_0p	NET-1-p ERR	The unit is disconnected	Check the network connection.
	NW LINK ERROR	from the network.

CAM cc SD ERR NET_5-0 ERR CAM- ERA cc SD ERROR (or no indication)

An SD card memory error occurred. The SD memory card may be not detected, or there is no available space on the SD memory card on the camera.

Check the SD memory card and the settings on the camera.

58