Asante Technologies 9000 manual Default Vlan, Port Vlan ID

VLAN Management

The management operations allowed on a VLAN group are:

❑Creation

❑Deletion

❑Name configuration.

❑VID Change configuration.

❑Adding and deleting port members

❑Adding and deleting untagged sets

❑Sharing and unsharing VLANs

❑Inserting and removing MAC addresses

❑Toggling Management Access

Default VLAN

As per IEEP802.1Q specifications, the only VLAN that exists by default in the IntraChassis 9000 is the default VLAN, with VID = 1, and all ports as its members. Also, all ports belong to the default VLAN’s untagged set. The following table summarizes the Default VLAN configuration in the IntraChassis 9000.

Default VLAN Information	Operations Allowed for Default VLAN
Name: Default VLAN	Creation/Deletion: Not allowed
VID: 1	Set VLAN Name: Allowed
Port Members: All ports	Change VID: Not allowed
Untagged Set: All Ports	Port member Addition/Deletion: Allowed
Port PVID: 1 for all Ports	Untagged member Addition/Deletion: Allowed
Management Access: Enabled	MAC address Insertion/Removal: Allowed
	Toggle Management Access: Allowed
	Share/Unshare VLAN: Allowed

Table 5-2 Default VLAN information and operations

Port VLAN ID

Port VLAN ID or PVID is used for VLAN classification of incoming untagged frames and has meaning only when a port is configured to receive both untagged and tagged frames. The untagged frames get classified to the VLAN represented by the PVID of the ingress port and the tagged frames get classified to the VLAN represented by the VID carried in the tag header of the received

Page 5-15