Asante Technologies 9000 manual Repeat the two previous steps for the unit’s other side

Figure 2-1 Mounting rack bracket on the IntraChassis 9000 chassis 1 Place the IntraChassis 9000 chassis on a flat, stable surface.

2 Locate a rack-mounting bracket (supplied) and place it over the mounting holes on one side of the unit.

3 Insert five screws (supplied) into the holes and tighten with a Phillips screwdriver. Do not use less than six screws for this mounting.

	Rack Mounting/Desktop Placement
Guideline	Specification
Ventilation	Ensure that the rack is installed in a room where the temperature
	remains below 40° C (104° F). Ensure also that there are no
	obstructions, such as other equipment or cables, blocking airflow to
	or from the IntraChassis 9000 vents.
Clearance	In addition to providing clearance for ventilation, ensure that there is
	adequate clearance for servicing the modules of the IntraChassis 9000
	from the front.

4 Repeat the two previous steps for the unit’s other side.

Page 2-7