Asante Technologies 9000 manual Defaults and Specifications, Configuration Default Setting

Introduction

Defaults and Specifications

The IntraChassis 9000 is shipped with the following factory default settings and specifications:

Configuration	Default Setting
Backplane Speed	32Gbps.
Switching Method	Store-and-forward
Forwarding Rates:	Switched 10Mbps = 14,880 pps
(64 byte packets)	Switched 100Mbps = 148,810 pps
	Switched 1000Mbps = 1,488,100 pps
Buffer Size	4MB
MAC Address Table	8K
Full-Duplex	Standards based Auto-negotiation enabled
VLAN	64 port based VLANs, GVRP support, 802.1Q VLAN Tagging
Spanning Tree Protocol	802.1D, enabled
Flood Rate Limiting	Broadcast traffic
Priority	802.1Q, 8 levels mapped to 4 Queues
RMON	Groups 1-3, 9
SNMP	MIB-II, Bridge MIB, RMON MIB, Asanté private MIBs
Console Baud Rate	9600
Password	Asanté
Power Requirements	90 - 224 V, 50 - 60 Hz
Environmental Operat-	Temperature: 0° - 45° C (Storage: -40° - 85° C)
ing Range	Relative Humidity: 5% - 95% non-condensing

Table 1-3 Defaults and Specifications

Page 1-10