Basic Configuration

Advanced 1000BaseX Port Configuration

If you are in the Basic Port Configuration menu for a 1000BaseX port and type a the menu shown in Figure 3-11.

IntraChassis 9000 Basic Port Configuration Menu Module Type: (2-GBIC)

Module: [1]

Port: [1]

Port

1

Port

2

 

===========

===========

Flow Ctrl:

SX-LinkUp (Forwarding)

SX-LinkDown

Priority:

1

1

 

 

Max. Broadcast Rate:

N/A

Max. Multicast Rate:

N/A

802.3x Flow Control:

Enabled

Port Default Priority:

1

<Cmd>

<Description>

 

h

Help for legends

 

r

Set Max. Broadcast/Multicast Rate

fToggle 802.3x Flow Control Enable/Disable

i Set Port Default Priority

q Return to Previous Menu

Command>

Select module Next module Prev module Select port Next port Prev port

Figure 3-11 Advanced Port Configuration menu - 1000BaseX port

To change the maximum broadcast or multicast rate, or to enable or disable flow control, or to set the default priority for a 1000BaseX port, use the procedures in the “Advanced 10/100BaseTX Port Configuration” section.

Global Port Configuration

This menu allows you to change the configuration information for all ports simultaneously. This feature is helpful in cases where you want the same configuration for all ports in a module.

Type g in the Basic Port Configuration menu for either 10/100BaseTX or 1000BaseX ports to display the Global Port Configuration Menu, as shown in Figure 3-12 and Figure 3-13.

Page 3-26

Page 68
Image 68
Asante Technologies 9000 manual Global Port Configuration, Advanced 1000BaseX Port Configuration