
Figure 4-2 Port Statistics Counters since system up
4 Use the s command to select a port for which you want to see the counters, or use n and p to find the port.
5 Use the g command to select a different module (group) in which you want to select a port, or use x and v to find the module.
6 Type t to stop the periodic updating of the counters, so you can record what they are at that time.
7 Type r to see a display of the same counters, but accrued since the last reset of the counters as shown in Figure 4-3.
Statistics
IntraChassis 9000 Port Statistics Counters | Module: 2 | Port: 1 | |||
Elapsed Time Since Up: | 000:00:00:55 |
|
| ||
<Counter Name> | <Total> | <Avg./s> | <Counter Name> | <Total> | <Avg./s> |
Total RX Pkts | 1474 | 26 | Total RX Bytes | 116246 | 2113 |
Dropped Pkts | 185 | 3 | Good Broadcast | 57 | 1 |
Good Multicast | 6 | 0 | Undersize Pkts | 0 | 0 |
Oversize Pkts | 0 | 0 | CRC/Align Errors 0 | 0 | |
Fragments | 0 | 0 | FCS Errors | 0 | 0 |
Collisions | 0 | 0 | Late Events | 0 | 0 |
283 | 5 | 1174 | 21 | ||
12 | 0 | 5 | 0 | ||
0 | 0 | 0 | 0 | ||
<Cmd> | <Description> | <Cmd> | <Description> | <Cmd> | <Description> |
r | since reset | x | next module | n | next port |
t | stop refresh | v | prev module | p | prev port |
q | quit | g | select module | s | select port |
Command>
Page