Basic Configuration

Viewing the System Log

The IntraChassis 9000 System Log records and displays any major system events on the switch, such as fatal errors, plugging in or removing a module, etc.

To view the system log, use the following procedure.

1 Type l in the Configuration menu. the System Log menu appears, as shown in Figure 3-27.

IntraChassis 9000 System Log Menu

<Cmd> <Description>

lDisplay System Log

c Clear System Log

q Return to previous menu

Command>

Figure 3-27 System Log menu

2 Type d to display the current system log, as shown in Figure 3-28.

IntraChassis 9000 System Log Summary

====================================================================

No. D: H: M: S Event

1.000:00:00:00 Reset NVDB sections to factory default

2.000:00:00:07 Spanning Tree Task Disabled

3.000:00:32:53 Spanning Tree Task Enabled

4.000:00:33:45 Spanning Tree Task Disabled

5.000:00:41:11 Spanning Tree Task Enabled

6.000:00:00:00 Reset NVDB section 0 to factory default

7.000:00:32:51 Spanning Tree Task Disabled

8.000:00:33:08 Spanning Tree Task Enabled

Quit Next Page

Figure 3-28 System Log Display

The system log displays any major system events that have occurred on the IntraChassis 9000. If no major events have occurred, “System up” messages are displayed.

Note: The system Log holds a maximum of 64 entries.

3 Press any key to display the next page of System Log infor- mation.

Page 3-46

Page 88
Image 88
Asante Technologies 9000 manual Viewing the System Log, System Log menu