Image File Downloading Configuration

Current Baud Rate: 9600 bps

Please select one from the following baud rate settings, or press any other key to quit:

WARNING: The user must use the same baud rate setting of the terminal after he/she confirms to change the baud rate setting of the console in order to work correctly.

<Cmd> <Description>

aSet Baud Rate to 1200 bps

bSet Baud Rate to 2400 bps

cSet Baud Rate to 4800 bps

dSet Baud Rate to 9600 bps

eSet Baud Rate to 19200 bps

fSet Baud Rate to 38400 bps

gSet Baud Rate to 57600 bps

Choice>

Figure 3-25 Baud Rate menu

4 Select one of the options in the above screen to select the required baud rate and confirm it by typing y.

5

6

Type a to select the Destination Bank.

Use any serial communications software like Procomm Plus, HyperTerminal, ZTerm, etc., to download the image file. Follow the instruction manual of the serial communications software for file transfer instructions.

Note: The terminal on which serial communications software is running must have the same baud rate as the IntraChassis 9000 management module console. The connection from the terminal to the switch Console port must be an RS232C straight-through cable.

7 Type d to download to the selected destination bank or b to download and reset.

8 Type q to return to the previous menu after performing a successful download.

Note: The baud rate default for Console management is 9600 bps. If you select a baud rate for the console port other than 9600 bps, the screen will display garbage data until the connected terminal is set to the same baud rate as the console.

Page 3-43

Page 85
Image 85
Asante Technologies 9000 manual Baud Rate menu