Asante Technologies 9000 manual User Interface Configuration menu

Basic Configuration

User Interface Configuration

The User Interface Configuration option lets you set the idle time-out periods for both the Console and Telnet user interfaces, and also lets you change the password used for logging in to the configuration menu. Typing u in the Configuration menu displays the User Interface Configuration menu, as shown in Figure 3-30.

IntraChassis 9000 User Interface Configuration menu

Console UI Idle Time Out		5	min
Telnet UI Idle Time Out		5	min
Telnet Session Status:
Session	Status	Source IP
1	Active	192.203.54.240
2	Inactive	<none>
3	Inactive	<none>
4	Inactive	<none>

<Cmnd>	<Description>
c	Set Console UI Time Out
t	Set Telnet UI Time Out

pChange Administrator Password

qReturn to previous menu

Command>

Figure 3-30 User Interface Configuration menu

Current Settings

Table 3-12 describes the settings in the UI Time-out Configuration Menu.

Setting	Description
Console UI Idle Time-	Duration of time the Console will remain idle before returning to
out	the main menu.
Telnet UI Idle Time-out	Duration of time the console will remain idle before closing the
	Telnet connection.

Telnet Session Status

Inactive or Active, depending on whether session is in progress.

Telnet Session Source IP

The IP address of the device being used for Telnet Management.

Table 3-12 UI Time-out Settings

Page 3-50