Bootstrap Configuration

Loading Software Locally

The IntraChassis 9000 will always boot locally unless you set it to boot load remotely. It would then download the new image code and reset to load locally.

1 Open the Bootstrap Configuration Menu by typing b in the Configuration Menu.

2 Type a in the Bootstrap Configuration Menu if you need to toggle the Boot Bank setting for the next boot. Typically, you will want to set the boot bank to be the one on which the latest version of the Image resides.

The IntraChassis 9000 is set to load software locally from its flash memory. This occurs whenever the unit is powered on or reset.

Loading Software Remotely

To set the IntraChassis 9000 to download its software over the network from a remote server, use the following procedure.

1 Open the Local Bootstrap Configuration Menu by typing b in Configuration Menu.

2 Open the Remote Bootstrap Configuration Menu by typing r in the Local Bootstrap Configuration Menu. The menu appears, as shown in Figure 3-4.

Page 3-7

Page 49
Image 49
Asante Technologies 9000 manual Loading Software Locally, Loading Software Remotely