Asante Technologies 9000 manual Viewing Current Operating Information Setting Description, Ram

Viewing Current Operating Information

Setting	Description
System Up Time	The amount of time the system has been running since last reset
	or power on.
Bank 1 Image Version/	The version and compilation date of the runtime code that is
Date	stored in Bank 1. (Running) indicates code is currently active.
Bank 2 Image Version/	The version and compilation date of the runtime code that is
Date	stored in Bank 2.
Prom Image Vers/Date	The version and compilation date of {{what?}}.
DRAM Size	The size in megabytes (MB) of the unit’s Dynamic Random
	Access Memory.
EEPROM Size	The size in megabytes (MB) of the unit’s EEPROM.
Flash Size	The size, in MB, of the switch’s flash memory, or non-volatile
	RAM.
Console Baud Rate	The current rate which data transfers to the console from the
	IntraChassis 9000.
System Name	The name assigned to the IntraStack for network purposes.
System Location	The physical location of the IntraStack.
System Contact	Person responsible for configuration of the unit.
MAC Address	The hardware address of the IntraChassis 9000; this address can-
	not be changed
IP Address	The unit’s IP (Internet Protocol) address.
Subnet Mask	The IP subnet mask for the IntraChassis 9000.
Router	The IP address of the default gateway router to which the switch
	belongs.

Boot Load Mode

The current method in use for loading the switch’s software.

Table 3-11 General Information settings

Page 3-49