Asante Technologies 9000 manual Port Configuration

Basic Configuration

1 Open the SNMP Configuration Menu by typing n in the Configuration Menu.

2 Type d to Delete a Trap Receiver. A prompt for the entry of the trap receiver appears.

3 Enter the number of the entry you want to delete (1,2,3, or 4) and press Return.

The trap receiver is deleted from the SNMP Trap Receivers list.

Port Configuration

This menu allows you to configure manually each of the IntraChassis 9000’s ports for port speed, duplex, and auto-negotiation.

It also provides an overview of the entire IntraChassis 9000 system’s port operating status.

To access the Port Configuration Menu, type p in the Configuration Menu. A screen similar to Figure 3-6 appears.

System Module Map

=================

Please select one of the following slots

Slot Description (Module Type)

------------------------------------------

124 10/100BaseTX ports Module (24-100TX)

22 1000BaseX ports Module (2-GBIC)

324 10/100BaseTX ports Module (24-100TX)

42 1000BaseX ports Module (2-GBIC)

5<none>

6<none>

7<none>

8<none>

9<none>

Enter Module Number (1-8)>

Figure 3-6 System module map screen

Choose the module for which you want see a port configuration menu. If, for example, you chose slot 1, you would see a screen similar to Figure 3-7.

Page 3-14