Panasonic WV-CL924A operating instructions Focus or FLANGE-BACK Adjustment

FOCUS OR FLANGE-BACK ADJUSTMENT

The following adjustment should be made by qualified service personnel or system installers.

1. Loosen the screw on the side of the camera.

3.Tighten the screws on the side of the camera.

Caution: Tightening the screw by force will cause

damage to the screw or deviation of focus.

Flange-back

Adjusting Ring

Screw

2.Turn the flange-back adjusting ring to the desired position.

Note: Adjusting a focus in the visible rays may be soft-focused with the near-infrared light.

-13-