Standard Accessories | Panasonic WV-CL924A instruction

STANDARD ACCESSORIES

Body Cap	1 pc.
ALC Lens Connector (YFE4191J100)	1 pc.
AC Power Cord (only WV-CL920)	1 pc.
C-mount Adapter	1 pc.

-42-

Image 41

Panasonic WV-CL924A operating instructions Standard Accessories

Contents

Operating Instructions Bol, within an equilateral triangle, is Contents Preface Features Clean the CCD faceplate with care PrecautionsDo not attempt to disassemble the camera Handle the camera with care WV-CL924 Major Operating Controls and Their Functions Flange-back Adjusting Ring FB Auto Iris Lens Connector0Gen-lock Termination Switch Hi-Z, G/L 75Ω 1Gen-lock Input Connector GEN-LOCK 4AC/DC Compatible Input Terminal DC 12V IN/AC 24V 3Power Cord Socket WV-CL924 12 V DC/24 V AC ConnectionsWV-CL920 120 V AC 60Hz Recommended wire gauge sizes for 24 V AC line AC Power Supply Installation of Auto Iris Lens Connector Mounting the Lens Focus or FLANGE-BACK Adjustment Mounting from the top Installation of Camera Camera Setup Menu Setup ATW1 ATW2 AWC Press and hold down for 2 seconds or more Opening the Setup Menu All Reset Operation Setup Operation Important Notice Editing the CAM SET UP Menu Camera Identification Camera ID Setting Setting ProceduresTo edit the Camera ID To enter a blank space in the Camera ID To determine the display position of the Camera ID Light Control Setting ALC/ELCTo erase all characters in the editing area Back Light Compensation Back Light Comp ALC Mode with Preset on ALC Mode with Preset OFF Blinking Gain Control Setting AGC ON/OFF Shutter Speed Setting Shutter Electronic Sensitivity Enhancement Sens UP Important Notices Synchronization Setting Sync VBS Gen-lock Mode Extvbs Page Line-lock Sync Mode LL VS Gen-lock Mode Extvs Phase Coarse ATW1 Auto Tracing White Balance White Balance Setting White BALAuto-Tracing White Balance Mode ATW Select AWC → Manual Fine Adjustment for AWC ATW Motion Detector Setting Motion DET Lens Drive Lens Drive Signal Selection Special Menu Special Burst BW Prevention of Blooming and Smear To reset to the factory settings AGC SpecificationsPage Standard Accessories Optional Accessories Panasonic Canada Inc