Panasonic WV-NP502/WV-NW502S Configure the schedule settings of the FTP periodic image transmission [FTP img. trans.]

78
How to set the schedules
Step1
Check the check box of the desired day of the week of
"FTP image transmission schedle".
→The selected day of the week will be validated for
the schedule.
Step 2
To designate time, click [C] and select the desired
"hour" and "minute".
When not designating time, check the checkbox of
"24h".
Step 3
Click the [Set] button after completing the settings.
→The result will be displayed at the bottom of the win-
dow.
Configure the schedule settings of the FTP periodic image transmission
[FTP img. trans.]
Click the [FTP img. trans.] tab on the "Network" page. (☞pages 20 and 21: How to display/operate the setup menu)
The schedule settings of the FTP periodic image transmission can be configured in this section. Refer to page 77 for
further information about the settings relating to the FTP periodic image transmission.
[Image capture size]
Select "QVGA", "VGA" or "1280x960" for the image cap-
ture size of images to be transmitted.
Default: VGA
Note:
•"QVGA" is available only when "1.3 mega pixel" is
selected for "Image capture mode".