80
Configure the settings relating to the schedules [Schedule]On the "Schedule" page, it is possible to configure the settings relating to schedules as follows.
•Alarm permission (Alarm input will be received only in the specified schedule.)
•VMD permission (Video motion detection will be active only in the specified schedule.)
•Access permission (Access to the camera will be allowed only in the specified schedule.)
(☞pages 20 and 21: How to display/operate the setup menu)
Up to 5 schedules can be set.
Step1
Select an action to be assigned to the schedule from
"Schedule mode". "Off" is selected at the default.
Off: No action will be taken for the respective schedule.
Alarm permission: Alarm input (terminal alarm 1, 2 and
3) will be received during the period of the schedule.
VMD permission: The Video motion detection (VMD)
function will be active during the period of the sched-
ule.
Access permission: Users whose access level is set
to 2 and 3 on the [User auth.]tab of "User mng."
page (☞page 66) can access the camera only in
the period of schedule.
Note:
•Select "On" for "User auth." on the [User auth.]tab
of "User mng." page (☞page 66) and "Off" for "Host
auth." on the "Host auth." page (☞page 67) to vali-
date "Access permission".
Step 2
Select days of a week by checking the respective
checkboxes.
Step 3
Click [C] to select the start time and the end time of the
schedule.
When not designating time, check the checkbox of
"24h".
Step 4
Click the [Set] button after completing the settings.
→The result will be displayed at the bottom of the win-
dow.
Note:
•The schedules displayed at the bottom of the win-
dow can be identified by colors assigned to each
schedule.