i-Pro series camera upgrade guide Maintenance guide
3
Panasonic System Solutions i-Pro_camera_UpgradeGuide_A
(1) Open the command prompt.
(2) Move to the directory where you have saved the
setup data by using "cd" command.
(3) Enter "FTP 192.168.0.10 (IP address of the camera)".
(4) Enter the User Name and Password. The default User
Name is "admin", password is "12345". "230 User
admin logged in" will be displayed when successful.
(5) Enter "cd C:" to move to the C drive of the camera.
"250 CWD command successful" will be displayed
when successful.
(6) Enter "bin" or "binary" to set FTP binary mode. "200
Type set to I." will be displayed when successful.
(7) Enter "put xxxxxsetup.dat" to upload the saved setup data. The following message will be displayed when successful.
200 PORT command successful.
150 Opening BINARY mode data connection for 'xxxxxsetup.dat' (xxxxx bytes).
226 Transfer complete.
ftp: xxxxx bytes sent in x.xxSeconds xxx.xxKbytes/sec.
(8) The camera will restart automatically.
(8) Enter "bye" to î‚¿nish the FTP session.
(9) Close the command prompt.
+++++++++++++++++++++++++++++End of the document+++++++++++++++++++++++++++++++++