11
The method of controlling the quantity of light is selected from the following in accordance with
the lens to be used.
ALC (default): The iris of the lens is automatically adjusted in accordance with the brightness
of a subject. Select "ALC" when using an ALC lens.
ALC+: Controls the quantity of light with a combination of the electronic shutter and auto iris. This
selection is suitable at shooting a bright subject such as an outdoor subject with auto iris
lens. Be aware that flicker may occur when a subject is under fluorescent lighting.
ELC: Controls the quantity of light with the electronic shutter. This selection is suitable for use
of a lens with fixed iris or manual iris.
Back light compensation functionFollow the procedure below.
Step 1
Set “ALC/ELC” to “ALC”, and then press the [SET] button.
→The “ALC” screen appears.
Note:
• When“ALC/ELC”issetto “ELC”or“ALC+”and the[SET]button ispressed,the“ELC”or
“ALC+”screenwillappear.
Step 2
Move the cursor to “BLC” and select from the following options.
ON: Automatically compensate when the background is brighter than the subject.
OFF (default): This mode is used when the area in front of the subject is extremely bright.
Step 3
Move the cursor to “ABS” and select from the following options.
ABS (Auto Black Stretch Technology)
The latest digital signal technology is applied to automatically detect the dark areas in the
image, acquire the brightness data around the dark areas, and perform real-time color adjust-
ment by calculating the best correction curve for each area. This function can be used to per-
form real-time adjustment and correction of back light and dark area, and reproduce natural,
clear images.
ON: Uses ABS.
OFF (default): Does not use ABS.
“ALC CONT” screen Mask setting screen“CAMERA SETUP” screen
**ALC CONT**(1)
BACK LIGHT COMP
OFF
ABS
MASK SET
- +
LEVEL .I..... 0
RET TOP END
BLC
OFF
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
OFF
VMD
RET TOP END
D&N(ELE)
OFF