Panasonic WVCP304 5Electronicsensitivityenhancementsetting[SENSUP], 6 White balance setting [WHITE BAL]

Note:

 • When"SENSUP"issettotheAUTOmode,“AGC”cannotbesetto“OFF”.

5Electronicsensitivityenhancementsetting[SENSUP]

Use of the electronic sensitivity enhancement function increases the light sensitivity of the

CCD, and accordingly the image becomes brighter. The magnification is unchanged for selec-

tion of FIX, and the magnification is automatically adjusted in accordance with the illuminance

of a photographic subject for selection of AUTO. The magnification of the electronic sensitivity

is selectable from the following.

OFF (default)/X2 AUTO/X4 AUTO/X6 AUTO/X10 AUTO/X16 AUTO/X32 AUTO/OFF/X2 FIX/X4

FIX/X6 FIX/X10 FIX/X16 FIX/X32 FIX/X64 FIX/X128 FIX/X256 FIX/X512 FIX

Note:

 • When"ALC/ELC"issetto"ELC"or"ALC+",onlytheAUTOmodeisenabled.

 • When "SHUTTER" is set to options other than "OFF", the electronic sensitivity enhance-

ment setting cannot be performed and "---" appears.

 •When the magnification of "SENS UP" is increased, the screen becomes coarser,more

whitish, or more flawed. However, this phenomenon is normal.

6 White balance setting [WHITE BAL]

The white balance adjustment is selectable from the following.

ATW1 (default): Activates the automatic color temperature tracking mode.

The camera continuously check the color temperature of the light source and

automatically adjusts the white balance. The adjustment of the color tempera-

ture ranges from approx. 2,700 K to 6,000 K.

ATW2: Activates the sodium lamp automatic color temperature tracking mode. The camera

automatically achieves an optimal white balance under the sodium lamp. The adjust-

ment of the color temperature ranges from approx. 2,000 K to 6,000 K.

• Ifthesituationmeetsoneofthefollowings,colormaynotbeaccuratelyreproduced.

 • Thesubjectismostlyhighly-colored.

 • Thephotographicsceneisunderthebrightblueskyoratnightfall.

 • Theilluminationofthelightilluminatingthesubjectisinsufficient.

When "AWC" is selected, follow the steps below to adjust the white balance.

**CAMERA SETUP**

SCENE1

ALC/ELC ALC

SHUTTER OFF

AGC ON(HIGH)

SENS UP OFF

WHITE BAL ATW1

DNR HIGH

AUTO1

VMD

RET TOP END

D&N(IR)

OFF