Speed Dialer
Storing Phone Numbers in the Speed Dialer Memory
You can store up to 10 phone numbers in the Speed Dialer memory. The dialing buttons ((0) to (9)) function as memory stations. Do not press any memory stations before storing to prevent misoperation.
Make sure that the handset is on the cradle, the AC adaptor is connected and the
1 Press (FUNCTION/EXIT).
2 | Press (ß) OK/EDIT. |
3 | Enter a phone number, up to 22 digits. |
³If you enter a wrong number, press | |
| (CLEAR) and enter the correct number. |
4 | Press (AUTO). |
5 | Press a memory station number ((0) to |
(9)). (Ex. (1) is pressed.) |
³A beep sounds.
³The display will return to step 1. You can continue storing other numbers after pressing (ß) OK/EDIT.
³To return to the standby mode, press (FUNCTION/EXIT) or wait for 60 seconds.
11:50AM11/24
SAVE AUTO# ?
11:50AM11/24
ENTER PHONE NO.
11:50AM11/24
1234567890
AUTO=SAVE
11:50AM11/24
1234567890 PRESS
11:50AM11/24
1234567890 SAVE IN AUTO 1
11:50AM11/24
SAVE AUTO# ?
³You can exit the programming mode any time by pressing (FUNCTION/EXIT). ³If a pause is required for dialing, press (REDIAL/PAUSE) where needed.
Pressing (REDIAL/PAUSE) counts as one digit (p. 40).
32
