47
Useful Information
Problem
The unit does not display
the caller’s name and/or
phone number.
A caller called you, but the
caller’s information was not
recorded in the Caller List.
The display goes to the
standby mode while viewing
the Caller List.
(REDIAL/PAUSE) does not
function properly.
You cannot have a
conversation using the
optional headset.
Previously programmed
information is erased.
If you cannot solve your
problem
Remedy
Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
Telephone line noise may be interfering
with the Caller ID information.
If you receive two calls at the same
time, only one of the Caller ID
information can be recorded.
Do not pause for over 60 seconds while
searching.
The button has a double function as
either redial or pause. It will redial the
last number dialed if pressed at the
outset of a call (p. 20). If another
number has been dialed first, it will
operate as a pause button (p. 40).
Make sure that the optional headset is
connected properly (p. 43).
Press (SP-PHONE/HEADSET) to make or
answer a call.
If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
Call our customer call center at
1-800-211-PANA(7262).
Panasonic’s e-mail address for
customer inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico
ONLY
PQQX12879ZA-BM04 01.3.7 3:52 PM y[W 47