Incoming Call Tone, Incoming Tone ? | Panasonic X-TSC14B, KX-TSC14W

Press (ß) OK/EDIT (SAVE key).

³A beep sounds.

³The display will return to step 2. To return

to the standby mode, press (FUNCTION/EXIT) or wait for 60 seconds.

ÒSpecial Features

Incoming Call Tone

While one line is being used, you may be informed by two tones if another call has arrived on the other line. This incoming call tone can be set/deleted by programming. Your phone comes from the factory set to “2”.

Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off.

1 Press (FUNCTION/EXIT).

2	Press (_) or (^) repeatedly until
2	“INCOMING TONE ?” is displayed.
3	Press (ß) OK/EDIT.
3	³The current setting is displayed.
	ON:	The incoming call tone will be
		heard as long as the other line
		rings.
	³2:	The incoming call tone will only be
		heard 2 times (factory preset).
	³OFF: The incoming call tone will not be
		heard.

11:50AM11/24

SAVE AUTO# ?

11:50AM11/24

INCOMING TONE ?

11:50AM11/24

ON 1=SAVE

4 Press (_) or (^) to select the desired setting.

5

³You can exit the programming mode any time by pressing (FUNCTION/EXIT).

³If the ringer volume is set to “OFF”, the incoming call tone will not be heard even if the incoming call tone is set to “ON” or “2”.

42

Image 42

Panasonic X-TSC14B, KX-TSC14W operating instructions Incoming Call Tone, Incoming Tone ? is displayed

Contents

KX-TSC14W Serial No Date of purchase Before Initial UseAttach your purchase receipt here For your future reference Name and address of dealer One Contents Useful Information Location of Controls OK/EDIT No Items Stored DisplayNEW Calls John Smith Settings Connecting the Handset/AC Adaptor Connecting the Telephone Line Cord To connect a two-line telephone jackConnect the telephone line cords to the unit as follows To connect two single-line telephone jacks If you use the unit only as a single-line telephone Connecting a Communication Device With Transparent Plugs Setting the LCD Contrast Save AUTO# ?LCD Contrast ? Tone 1=SAVE Selecting the Dialing ModeSET Dial Mode ? Press or to select Tone or LINE1 1=NEXT Selecting the Line ModeSET Line Mode ? LINE2 1=NEXT Programming Summary of Preparations Press or repeatedly until the desired function is displayedPress ß OK/EDIT to go to the next step #=AM/PM Time and Date AdjustmentSET Clock ? You can select AM/PM or military time by programming For Caller ID service users p Enter MONTH/DATE Selecting the Ringer Volume Ringer Volume ? Using the speakerphone Making Calls To put a call on hold What the line indicator meansTo redial the last number dialed To release the hold Answering Calls Talk into the MIC microphone Using the Other Line During a Conversation Conference Call During a conference call³To put both lines on hold, press Hold Caller ID Service How caller information is displayed when a call is received To check the number of new calls Using the Caller List Viewing the Caller List Ex. When you search from the most recent call John WhiteNEW Call Calling Back from the Caller List Lift the handset or press Editing a Caller’s Phone Number Press Auto Storing Caller List Phone Number in the Speed Dialer MemorySave in Auto Press a memory station number Erasing Caller List Information To erase a speciﬁc caller from the Caller ListTo erase all entries in the Caller List Enter Phone no Speed DialerStoring Phone Numbers in the Speed Dialer Memory AUTO=SAVE Press Dialing a Stored NumberTo erase a stored number Clear Auto Voice Mail Service Save MAILBOX# ? Storing an Access Number in Your Voice MailEnter your access phone number up to 32 digits Enter MAILBOX# Setting the Voice Mail Tone Voice Mail TONE?On 1=SAVE Listening to Voice Mail Messages Voice MailFollow the pre-recorded instructions Special Features For Call Waiting Service UsersCall Waiting Caller ID Feature Flash Button Selecting the ﬂash timeSET Flash Time ? For Analog PBX Line/Long Distance Service Users How to Use the Pause ButtonFor Rotary or Pulse Service Users Temporary Tone Dialing Line Selection ? Press or to select the desired settingLine Selection Auto 1=SAVE Incoming Call Tone Incoming Tone ?Incoming Tone ? is displayed Using an Optional Headset Connecting an Optional Headset to the UnitIllustration headset is a KX-TCA90 To adjust the headset receiver volume 4 levels Making/Answering CallsDuring a conversation with an optional headset Wall Mounting ProblemRemedy Before Requesting Help ³The button has a double function as Answer a call Important Safety Instructions Useful Information FCC and Other Information Ringer Equivalence No. REN Useful Information For product service When you ship the product