casing, image sensor and roller inside the scanner) regularly (about every
WARNING: Do not use any solvents or corrosive liquid (for example, alcohol, kerosene..., etc.) to clean any part of the scanner, otherwise the plastic material will be permanently damaged.
Cleaning the Roller
1.Follow the instructions above to clean the scanner’s outer casing first.
2.Connect the power supply to the scanner.
3.With scanner power off, press and hold the power button for 5 seconds. The scanner will enter cleaning mode. The power and status/card indicators will be lit.
4.Insert the supplied roller cleaning sheet as shown. Note the direction of the sponge on the sheet when inserting.
Note: Make sure that there is no visible dust on the sheet before inserting it into the feeding slot.
5.The cleaning sheet will be brought into the feeding slot automatically, and the cleaning process will begin. During the cleaning process, the Power and Status/card indicator lights will blink slowly and simultaneously.
25
