6.When the cleaning process is completed, the cleaning sheet will be ejected from the feeding slot, and the power indicator light will go off.
Remove the cleaning sheet, store it in a safe place and protect it from dust.
Cleaning the Image Sensor
1.Follow the instructions on page 24 to clean the outer casing of the scanner first.
2.With the scanner powered off and disconnected from the power supply, insert the sensor cleaning swab into one end of the output slot.
Note: Make sure that there is no visible dust on the swab before inserting it into the output slot.
3.Gently slide the sensor cleaning swab to the other end of the output slot.
4.Repeat step 3 two or three times consecutively.
CAUTION: Do not apply too much force on the swab.
26
