Pantech C120 manual Change PIN1, Phone Lock, Change Password, Phone Barring, Change PIN2, Settings

Settings

•Enabled: Input PIN1 whenever the power is turned on.

•Disabled: Do not input PIN1 whenever the power is turned on.

Change PIN1

Change the PIN1 number.

You can change the PIN1 number only when the phone is set for PIN1 Enable.

The Default PIN1 is “1111”.

Phone Lock

This function allows you to lock your phone until the correct password is input.

Push in on joystick after you type the password.

Change Password

This function allows you to change your phone’s password. The default password is 1234.

Phone Barring

This function offers multiple methods to limit incoming or outgoing calls. In general, the barring service becomes activated by interoperating with the network, but phone barring is made by the phone itself. Major functions are as

80follows.

060613_C120_EN_REV01.indd 80

•Incoming: Limits all incoming calls.

•On: Set up all incoming calls barring.

•Off: Cancel all incoming calls barring.

•Outgoing: Limits all outgoing calls. When you attempt to make a call that has the prefixed number that you previously registered, the call is barred.

•Bar All: Set up all outgoing calls barring.

•Bar Prefixed: Add and deletes the prefixed number (Prefix also means your 10 or 11 digit number of your choosing).

•Off: Cancel all outgoing calls barring including the bar prefixed.

Fixed Dialing (Fixed Dialing Numbers)

Fixed Dialing is a service that limits your access to specific numbers in the Address Book list recorded on the SIM. Input the PIN2 to set up or cancel this service. (PIN 2 mustbe correctly entered within 3 tries.)

•On

•Off

•Fixed Dial List: Display the numbers recorded in the Fixed Dialing list.

Change PIN2

This function allows you to change your phone’s PIN2 code. The Default PIN2 is “2222”.

2006.6.13 4:57:2 PM