Pantech C3b manual Using T9 mode, Using ABC mode, Changing case

Key	Function
Press the [c] key	Deletes characters one by one. After
	deleting all the characters, returns to
	the previous screen.
Press and hold the	Deletes all the characters and moves
[c] key	the cursor to the beginning of the input
	screen.

Using T9 mode

In the T9 alphabet Editor, most commonly used words appear as you input the text.

❶Press the keys numbered [2] to [9] to input text. For example, press [4][3][5][5][6] in sequence to input ‘hello’. The word

you are typing appears on the display. It may likely change with each key you press.

❷Enter the whole word before editing or deleting any keystrokes.

❸Upon searching a word, input the next text.

❹If the search fails, press [*] key to search which text can be typed in. Your phone displays the most commonly

		Entering text
	used choices first.
❺ Continue entering the next word.
Using ABC mode
		When typing in ABC mode, press the
		key labeled with the target letter once
		for the first letter; press it twice for the
		second letter, and so on.
		Example: To display the letter “C”,
		quickly press the [2] key three times.
		To display the letter “K”, press the [5]
		key twice. This method is called Multi-
		tap typing.
	NOTE The cursor moves to the right when you press a different
key. When entering the same letter twice or a different letter on the
same key, just press the [Right] scroll key or wait a few seconds
for the cursor to move to the right automatically, and then enter the
next letter. Refer to the table below for more information about the
characters available. The characters vary depending on the text
input language.
Changing case
To change the case of the next letter that you type, press
the [#] key.
There are three cases:			35