Pantech C3b Priority Set Normal, High, or Low, Edit Edits text, Call Log Shows the recent calls

Messaging

recipient’s phone sends a reply to let you know when your message has been read if your carrier>s network supports this functionality.

•Priority: Set Normal, High, or Low.

❹After writing the message, if the user wants to change the already added object, press the [u/d] key to move to the already added object and press the [Edit] or [Replace] Soft key ([]]). This key is automatically linked to editing text, or replacing image or sound.

•Edit: Edits text

•Replace Image: Replaces the selected image/photo with a different selected image from the sub-menu.

•Take a Photo: Creates a new photo

•Photo Album: Already saved photo

•Downloaded: Downloaded image

•Replace Sound: Replaces the selected sound with a different selected sound from the sub-menu.

•New Voice Memo: Creates a new recording memo

•Voice Memo: Already recorded sound

•Downloaded: Downloaded sound

❺When you have finished creating the message, press

48the [o] key to send the message. If you want to send

a Multimedia Message to a new number or an e-mail address that is not stored, press the [u] key to move to Add Entry, and then just enter the number or e-mail address (Add Entry is only for entering numbers or e- mail addresses that are not searched).

If you want to search for a stored name, enter the name using the keypad.

You can also add numbers from Call Log. To find the Call Log menu, press the [Options] Soft key..

•Call Log: Shows the recent calls

•Cc (Carbon copy): Sends the message to both the recipient and a third party in Address Book Entry.

•Bcc (Blind carbon copy): Sends the message to a third party but does not notify the other recipients in Address Book Entry.

After selecting the correct number, press the [o] key to check it.

When you have finished entering the recipient information, press the [Send] Soft key.

NOTE To send a text message or MMS message to someone not in your phonebook, enter the phone number at the idle screen and select the right soft key and then select type of message.