ParaBody 829102 manual Right LEG EXT HANDLE9 & Left

STEP1:

STEP2:

Insert four PARABODYLOGO END CAPS(37) into the ends of REARBASE LEG (12) and FRONTBASE SUPPORT

(1). See FIGURE

Slide two1-I/4 x 5" GRIPS(36) over tubes on REAR. BASELEG(12). See FIGURE

1. "

STEP3: Securely assemble REARBASELEG(12) to LEGFRAME(11) using two 3/8 X BOLTS(20), four 3/8" FLATWASHERS (24), and two 3/8" NYLOCKNUTS(25). See FIGURE2.

FIGURE2 ~ 3/8 x y'

STEP4: Securely assemble FRONTBASESUP- PORT(~.) ,~~. . LEGFtL~-:~ (11) using two 3/8 X 3" BOLTS(20), four 3/8" FLAT WASHERS(24), and two 3/8" NYLOCK NUTS(25). See FIGUR~

STEP5: Slide two 1-1/4 X 5" GRIPS(37) over

RIGHT LEG EXT HANDLE(9) & LEFT

LEGEXTHANDLE(10). See FIGURE

FIGURE 4