15.Assemble the BACKPADto the WOLFFSLEEVE,slide the two (2) remaining HESGETABSover the PIN of the WOLFFSLEEVE(ONE ONEACHSIDE) as shown on drawing, and SECURELY assemble each HINGETABto the BACKPADusing two (2) 3/8 X
IN. WASHERS. (MAKE SURE BOTH HINGE TABS ARE UP AGAINST THE OTH~ER HINGES)
16.Attach two sets of UPRIGHTLABELS(1 to 12) to the inside surfaces of both UPRIGIITFRAMES shown on drawing.
866103 EXERCISESET-UP
.~
6.
To perform FLATBENCHEXERCISES,lift the BENCHSLIDE up and set the HEIGHT ADJUSTMENTBARinto the bottom rungs of the UPRIGHTFRAMES.Lower the BENCHSLIDE down on top of the HEIGHTADJUSTMENTBAR. Adjust the WOLFFSLEEVEforward or backward until proper alignment with UPRIGHTSis reached, and tighten THUMBSCR~EW.
To perform INCLINE PRESSES, lower the BENCHSLIDE down onto the BENCHFRAME.Place the HEIGHTADJUSTMENTBARinto the forth or fifth rungs (DEPENDINGONANGLEOF INCLINE) of the UPRIGHTFRAMESAdjust. the WOLFFSLEEVEforward or bac]c~vard until proper alignment with UPRIGHTSis reached, and tighten THLrMBSCREWAdjust. the. SEATPAD, by pulling back the
To perform M]I,ITARY PRESSES, lower the BENCHSLIDE down omo the BENCHFRAME.Place the HEIGHTADJUSTMENTBARinto the fifth rungs of the UPRIGHTFRAMESAdjust. the WOLFFSLEEVEbackward to the last adjustment hole in the BENCHSLIDE, and tighten
THUMBSCREW.
To perform DECLINE PRESSES, and AB CRUNCHESthe OPTIONAL LEG CURLrEXTENSION PEDESTALwill be needed. Insert the
the BUSHINGon the LEG EXTENSION(AT THE SAMETIME). insert the LEG EXTENSION NECKinto the UPRIGHTTUBEof the BENCHFRAMEand allow the
To perform SQUATS, (MAKE SURE THAT NO ATTACHMENTSARE IN THE UPRIGHT TUBE OF THE BENCHFRAME)slide the WOLFFSLEEVEto the front of the BENCHSLIDE. Rotate the BENCHSLIDEup and allow it to rest on the UPRIGHTTUBE.Allow the BACKPADto hang down. (THE BANGING WEIGHT OF THE BACK PAD WILL KEEP THE BENCH SLIDE FORWARD)
Please follow the WALLCHARTfor the correct wayto use this product.
Part # 6657601 | 4 | Revision: 10/28/96 |
