4-1/2" PULLEY,~
FIGURE 10
STEP10:
"'~~3/8X2"
~UPRIGHTFRAME
3/8X2-3/4"
¯Route the end of the 134-3/4" CABLE(10) through the slot of the UPRIGHTFRAMEthen SECURELYassemble one previ- ously removed 4-1/2" PULLEYto the UPRIGHTFRAMEusing two previously removed 3/8 X 2-3/4" BOLTS,two 3/8" FLANGESPACERS,two 3/8" WASHERS,and two 3/8" LOCKNUTS. (NOTE: The CABLE(10) s]aould be routed between the pulley and the retaining bolt as shownin FIGURE10.)
¯Wrap the CABLE(10) aorund one 3-1/2" PULLEY(8) and SECURELYassemble the PULLEYto the: plate on the UPRIGHT FRAMEusing one 3/8 X 2" BOLT(14), one CABLERETAININGCLIP (13), one 3/8" WASHER(17), and one 3/8"
NUT(18). (NOTE: Before tightening PULLEY,make sure RETAININGCLIP is positioned as shown in FIGURE10.)
¯ WRAPthe CABLE(10) around the bottom 3-1/2" PULLEYof the PULLEYBLOCKasshown in FIGURE10.
1/2 | I | 1/2 | I | 1/2 | 1 | 1/2 | I | 1/2 | I | 1/2 |
I I I | 1 | I I I I I | | | | 4 | I I ~._1 | 6 |
| | | | | |
