ParaBody cm3 manual X 4-1/4 X 3-3/4

FIGURE 18		3/8 X 4-1/4”	68
			51	37
		8		65
3/8 X 3”	67
				11
3/8 X 3-3/4”	57		2
		49		64
			48	63
	64
	37
			63
	30

STEP 18:

•Securely assemble the ball end of the LEG CABLE (30) and one 3-1/2” PULLEY (37) to the LEG PEDESTAL (8) using two 3/8 X 3-3/4” BOLTS (57), two 3/8” X 1-1/16” FLANGE SPACERS (49), two 3/8” WASHERS (64), and two 3/8” LOCKNUTS (63).

(NOTE: The LEG CABLE (30) must be routed over the retaining bolt as shown in FIGURE 18.)

•Securely assemble one 3-1/2” PULLEY (37) to the UPRIGHT (2) using one 3/8 X 3” BOLT (67), two 3/8 x 3/4” FLANGE SPACERS

(48)and one 3/8” LOCKNUT (63). (NOTE: The LEG CABLE (30) must be routed over the retaining bolt as shown in

FIGURE 18.)

•Assemble one 3-1/2” PULLEY (37) to the BASE PLATES (11) using one 3/8 X 4-1/4” BOLT (68), two 3/8” WASHERS (64), two GUIDE CABLES (65), two 3/8 X 1” SPACERS (51) and one 3/8” LOCK NUT (63). See FIGURE 18.(Note: Loop the LEG

CABLE (30) around the PULLEY prior to assembling the PULLEY to the BASE PLATES.)

17