RCP2-1000
Remote Control Panel
for Rack Mount SSPAs
203211 Rev C ECO 3171
1 OF 4
DESCRIPTION
The Paradise Datacom Remote Control
Panel (RCP2-1000-RM) was designed to
provide easy remote monitor and control of
Paradise Datacom’s Rack Mount Solid State
Power Amplifier.
Control of the RCP2-1000-RM can be
handled through Front Panel operation, or
remotely through Parallel or Serial
communication to a remote computer.
The RCP2-1000-RM front panel includes
ten LEDs that indicate the internal state of
the Rack Mount SSPA. Five fault condition
LEDs on left side of the front panel indicate
the SSPA major faults plus a summary fault
state.
A 2 line by 40 character LCD provides an
extremely user friendly interface. Virtually all
of the controller’s setup and adjustments are
accessible from the LCD.
Four navigation buttons and a separate
Enter key allow the user to navigate the
firmware menu on the LCD. Separate buttons
have been provided for frequently used
functions.
Common feed interfaces are offered as
standard and isolation is provided at all RF
interfaces.
A range of RF hardware options is offered
to meet specific system requirements.
FEATURES
• Front panel or remote operation.
• Parallel and serial (RS232 / RS485)
connections
• Flash firmware is field programmable
• 2 line x 40 character LCD
• Easy-to-navigate firmware menu
structure
• 1 Rack Unit high
AT A GLANCE
The front panel displays the Mute and Online
statuses of the Rack Mount SSPA, and allows
monitoring of the following fault states:
• Summary
• Voltage
• Temperature
• Current
• Power Supply
Paradise Datacom LLC Phone: (814) 238-3450
328 Innovation Blvd. Fax: (814) 238-3829
State College, PA 16803 Email:sales@paradisedata.com
RCP2-1000 Remote Control Panel
RCP2-1000
SSPA REMOTE
CONTROLLER
PARADISE
DATACOM