COMSPHERE 392xPlus Modems
3-16 November 1996 3920-A2-GN31-30
The following provides information about the Quick Configuration LCD display.
aDisplays the network position of the modem. The letter C
indicates this is a
control modem, and T indicates this is a tributary modem.
bbb
Displays the network management address of the modem. The valid address field
range is from 001 to 256.
cDisplays the DTE mode. The letter A
indicates the currently selected port is in
Asynchronous mode, and
S indicates the currently selected port is in Synchronous
mode. If the NMS channel is selected, the letter in this location (A or S) will
indicate the status of Port 1. (The NMS channel is always in Asynchronous
mode.)
dd
Displays the line mode. The letters
LA
indicate Leased Answer mode,
LO
indicate Leased Originate mode, and D
indicates Dial mode.
ee Displays the modem DTE port that currently appears by the EIA status indicators
on the DCP
.
CC
indicates Control Channel.
DC
indicates Diagnostic Channel.
P1 indicates Port 1 in Singleport mode.
The following only appear on the 392x multiport modem:
M1
indicates Port 1 when TDM/MSD is enabled.
M2
indicates Port 2 when TDM/MSD is enabled.
M3
indicates Port 3 when TDM/MSD is enabled.
M4
indicates Port 4 when TDM/MSD is enabled.
B1 indicates Port 1 when DTE Bridge is enabled.
B2 indicates Port 2 when DTE Bridge is enabled.
ffff
Displays the modem’
s modulation scheme as shown below:
V34
indicates V
.34 family modulation.
V32t
indicates V
.32 terbo modulation.
V32b
indicates V
.32bis modulation.
V32
indicates V
.32 modulation.
TMp indicates Trellis Multipoint modulation.
V22b
indicates V
.22bis modulation.
V27b
indicates V
.27bis modulation.
V33
indicates V
.33 modulation.
V29
indicates V
.29 modulation.
V22
indicates V
.22 modulation.
V23
indicates V
.23 modulation.
V21
indicates V
.21 modulation.
212A
indicates Bell 212A modulation.
103J
indicates Bell 103J modulation.
xxxx Modem T
ransmit Rate indicates the rate at which the modem is transmitting data.
Possible values are 2400, 4800, 7200, 9600, 12.0 (12,000), 14.4 (14,400),
16.8 (16,800), 19.2 (19,200), 21.6 (21,600), 24.0 (24,000), 26.4 (26,400),
28.8 (28,800), 31.2 (31,200), or 33.6 (33,600) bps.
yyyyy
Symbol Rate indicates the baud rate used by V
.34 modulation. Refer to CCITT
specifications. Possible values are 3429, 3200L, 3200H, 3000L, 3000H, 2800L,
2800H, 2743L, 2743H, 2400L, 2400H.
zz Transmit Level indicates the power level at which the modem is transmitting
when running V
.34 modulation. Possible values are 01–
64 dBm.
To exit the Quick Configuration function and return to the Top-Level menu, press the , ,
or
key
.