5. Configuration Using the NMS
Parameter | Description |
|
|
VLAN ID Range | Specify a VLAN ID range. For each IP Range Rule, if |
| you selected Tag for Allow Tag/Untag, the VLAN field |
| should specify either an acceptable single VLAN, or |
| an acceptable VLAN Range, for VLAN tags on ingress |
| packets. If you selected Untag, the VLAN field should |
| specify a single VLAN only if you intend to have a |
| VLAN tag added to packets; if you do not intend to |
| have a VLAN tag added to packets, the VLAN field |
| should be left at the 0 - 0 default. |
|
|
Add VLAN to Ingress Pkt. | Specify whether the VLAN ID should be added to |
| ingress packets. |
|
|
Priority | Specify the priority to be used when adding a |
| configured VLAN ID to a packet. |
|
|
Fixed/Max | Specify the handling of VLAN priority (used only if the |
| received packet is already tagged): |
| Fixed – The packet's original priority will |
| automatically be replaced with the Priority |
| specified above, |
| Max – The packet's original priority will be replaced |
| with the configured Priority only if the packet's |
| original priority is greater than the configured |
| Priority. |
|
|
Ingress Limit | Specify the ingress limit in kbps for packets matching |
| this rule. |
|
|
Egress Limit | Specify the egress limit in kbps for packets matching |
| this rule. |
|
|
3. Click on Submit.
March 2005 |
