Paradyne 4929 DSLAM manual CLI Commands 2 Description, Set and Show Command Items and Values 1

6. Command Line Interface

Table 6-1. CLI Commands (2 of 2)

Command	Description
ENABLE_WEB_SERVER	Enables access to the DSLAM using the web server.
HELP	Lists available commands and their syntax.
LOGOUT	Ends the CLI session.
SET	Sets a configuration option. Most SET commands require
	that slot be specified, and allow port optionally to be
	specified. Exceptions are the two system SET commands
	for session timeout and system name.
	Syntax:
	set cli_session_timeout seconds
	set system_name name
	set slot 1 [[port] [all, port_number]] [item] [value]
	Items and values for SET commands are shown in
	Table 6-2, Set and Show Command Items and Values.
SHOW	Shows a configuration option. SHOW commands require
	that slot be specified, and allow port optionally to be
	specified.
	Syntax:
	show slot 1 [[port] [all, port_number]] [item] [value]
	Items and values for SHOW commands are shown in
	Table 6-2, Set and Show Command Items and Values.
WHO	Shows who is logged in the system.

Table 6-2. Set and Show Command Items and Values (1 of 3)

Items	Values
ADSL_ENCAPSULATION	[RFC1483-LLC,RFC1483-VCMUX]
ADSL_PORT_MODE	[ON,OFF,ADAPTIVE,FIXED_ADAPTIVE]
ADSL_SPEED	[XXXX YYYY]
	Where:
	XXXX = downstream rate (in kbps) and
	YYYY = upstream rate (in kbps)
ADSL_STANDARD	[MULTIMODE,G.DMT,G.LITE,T1.413,ALCATEL]
ADSL_VCI	[0–65535]
ADSL_VPI	[0–255]
ADSL_VPI_VCI_DETECT	[ON,OFF]
BACKBONE_VLAN	[0–4085]

4929-A2-GN20-00 March 2005 6-3