! Important Safety Instructions

1.Read and follow all warning notices and instructions marked on the product or included in the manual.

2.Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered.

3.Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord.

4.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous high voltage points or other risks. Refer all servicing to qualified service personnel.

5.General purpose cables are used with this product for connection to the network. Special cables, which may be required by the regulatory inspection authority for the installation site, are the responsibility of the customer. Use a UL Listed, CSA certified, minimum No. 24 AWG line cord for connection to the Digital Subscriber Line (DSL) network.

6.When installed in the final configuration, the product must comply with the applicable Safety Standards and regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory agencies and inspection authorities to ensure compliance.

7.A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If products installed in separate buildings are interconnected, the voltage potential may cause a hazardous condition. Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if necessary, implement corrective action prior to interconnecting the products.

8.Input power to this product must be provided by one of the following: (1) a UL Listed/CSA certified power source with a Class 2 or Limited Power Source (LPS) output for use in North America, or (2) a certified transformer, with a Safety Extra Low Voltage (SELV) output having a maximum of 240 VA available, for use in the country of installation.

9.In addition, since the equipment is to be used with telecommunications circuits, take the following precautions:

—Never install telephone wiring during a lightning storm.

—Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

—Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

—Use caution when installing or modifying telephone lines.

—Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

—Do not use the telephone to report a gas leak in the vicinity of the leak.

CE Marking

When the product is marked with the CE mark on the equipment label, a supporting Declaration of Conformity may be downloaded from the Paradyne World Wide Web site at www.paradyne.com. Select Library → Technical Manuals → CE Declarations of Conformity.

FCC Part 15 Declaration

An FCC Declaration of Conformity may be downloaded from the Paradyne World Wide Web site at www.paradyne.com. Select Support -> Technical Manuals -> Declarations of Conformity.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The authority to operate this equipment is conditioned by the requirement that no modifications will be made to the equipment unless the changes or modifications are expressly approved by the responsible party.

6388-A2-GB20-00

February 2005

B

Page 2 Page 4
Page 3
Image 3
Paradyne 6388 manual Important Safety Instructions
Page 2 Page 4

6388 specifications

The Paradyne 6388 is a versatile high-speed broadband modem, primarily designed for the demanding needs of data transmission in various networking environments. Launched by Paradyne, a company known for its pioneering technology in digital communications, the 6388 modem exemplifies the capability to handle significant bandwidth while delivering dependable performance.

One of the main features of the Paradyne 6388 is its robust support for a wide range of transmission standards. It is compatible with both DSL and T-1 connections, making it an adaptable solution for different types of networks. This flexibility allows organizations to utilize the 6388 in a variety of scenarios, whether they are operating in rural areas with limited infrastructure or urban environments with established high-speed connectivity.

The modem's built-in technologies significantly enhance its performance and reliability. With integrated error correction and advanced modulation techniques, the 6388 ensures that data keeps flowing smoothly even under less-than-optimal conditions. This results in better performance, reduced latency, and improved overall user experience, particularly for applications that require consistent throughput, such as video conferencing or large data transfers.

Another noteworthy characteristic of the Paradyne 6388 is its ease of configuration and management. The device typically includes intuitive web-based management interfaces, allowing network administrators to set up, monitor, and maintain the modem with ease. Features such as SNMP (Simple Network Management Protocol) support further facilitate network management, enabling remote monitoring of device status and performance metrics.

The 6388 is also designed with security in mind. It incorporates advanced features such as encryption and authentication protocols to safeguard data transmission, ensuring that sensitive information remains protected from unauthorized access.

Power efficiency is another important aspect of the Paradyne 6388. The design focuses on minimizing energy consumption while still delivering maximum performance, making it an eco-friendly choice for organizations aiming to reduce their carbon footprint.

In summary, the Paradyne 6388 modem stands out due to its versatility, advanced features, and reliable performance. Its compatibility with multiple standards, integrated technologies for enhanced performance, user-friendly management tools, robust security features, and energy-efficient design make it a robust solution for various networking needs. Whether for business communications or industrial applications, the 6388 continues to serve as a valuable asset in the digital landscape.
Top Page Image Contents