3. Using the Web Interface
Table 3-2. Wireless Setup (2 of 2)
Parameter | Description |
|
|
Channel B/G | Specify the RF (Radio Frequency) channel |
| router to use. Recommended values are 1, 6, and 11. |
| These three values do not overlap and could be used by |
| three neighboring wireless LANs. |
|
|
802.11 Mode | Specify whether the router will support only 802.11b |
| (11 Mbps) clients, only 802.11b+ clients (22 Mbps), only |
| 802.11g (54 Mbps) clients, or all. To allow any client to |
| connect, select Mixed. |
|
|
4X | Enable 4X mode only if all clients that will connect to the |
| wireless LAN support 802.11b+. |
|
|
User Isolation | Select if you want to forbid communication between users |
| on the wireless LAN. |
|
|
The Apply button will temporarily save these settings. To make the change permanent, click on Tools (at the top of the page) and select System Commands. At the System Commands page, click on Save All. Then turn off and turn on the router to put the settings into effect.
February 2005 |
