10.1.5pdnSyslogSeverityThreshold (RW):

The valid values are emerg (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), debug (7). This value corresponds to a minimum severity level that a syslog messages can be set. All syslog message with an enum value greater than the threshold will not be sent. The values are obtain from the RFC 3164, The BSD Syslog Protocol:

emerg

(0) - Emergency: system is unusable

alert

(1) - Alert: action must be taken immediately

critical (2) - Critical: critical conditions

error

(3) - Error: error conditions

warning (4) - Warning: warning conditions

notice

(5) - Notice: normal but significant condition

info

(6) - Informational: informational messages

debug

(7) - Debug: debug-level messages

10.1.6pdnSyslogRemoteDaemon (RW):

This value allows user to disable or enable syslog messages going to a remote daemon.

10.1.7pdnEntitySyslogTable (NA):

This table supports retrieval of the syslog messages. It is indexed by the entPhysicalIndex and the pdnSyslogNumber. It allows the clasification of messages per entity (for example, per port card). The table objects are :

10.1.7.1pdnEntitySyslogNumber (NA):

This is a sequentially increasing index of syslog messages starting at 1. When the table reaches its maximum size (as defined by pdnSyslogMaxTableSize) then the oldest message will be dropped without renumbering any messages that remain. The index is reset to 1 on a device reset or when the table is cleared (using pdnSyslogClearTable).

10.1.7.2pdnEntitySyslogMessage (RO): The text of the syslog message.

10.1.8pdnSyslogNumOfMsgInTable (RO):

This value let the users know how many syslog messages are currently in the syslog table.

10.1.9pdnSyslogMaxTableSize (RO):

The maximum number of syslog message the syslog table can hold.

10.1.10 pdnSyslogClearTable (RW):

Valid values are noOp(1) and clear (2). This object clears all the entries in the syslog message table.

10.1.11 pdnSyslogMsgToConsole (RW):

Valid values are disable (1), enable (2). This allows messages to be sent to the device’s console port. Note this is intended for debug use only! It is not recommended to be used to monitor syslog message on a regular bases. If one needs to constantly monitor the syslog messages, then they should use the remote syslog daemon, or other user interfaces.

94

November 2003

8000-A2-GB30-10

Page 99 Page 101
Page 100
Image 100
Paradyne 8820 PdnSyslogSeverityThreshold RW, PdnSyslogRemoteDaemon RW, PdnEntitySyslogTable NA, PdnEntitySyslogNumber NA
Page 99 Page 101

8620, 8820 specifications

The Paradyne 8620 and Hotwire 8620 GranDSLAM are advanced DSLAM devices designed to provide high-speed broadband access over existing copper lines. This installation guide will outline the main features, technologies, and characteristics of these powerful units.

The Paradyne 8620 is engineered to support various DSL technologies, including ADSL, ADSL2+, and VDSL. This versatility allows operators to deploy services tailored to the needs of their customers, enabling data rates of up to 50 Mbps downstream, making it an ideal choice for meeting increasing bandwidth demands. The Hotwire 8620 GranDSLAM shares many similarities, focusing on providing enhanced service delivery for both residential and business users.

One of the key features of the GranDSLAM series is its modular architecture. Both models support up to 48 subscriber line interfaces in a single chassis, which provides significant scalability. Operators can seamlessly increase capacity by adding additional cards to accommodate growth. The devices are designed for easy deployment and management, equipped with an intuitive web-based interface that simplifies configuration and monitoring tasks.

Both units also feature advanced management capabilities, including support for SNMP and TR-069 protocols. This allows service providers to manage and provision devices remotely, significantly reducing operational costs and improving service reliability. The GranDSLAM models can also provide detailed diagnostic information, helping operators quickly identify and troubleshoot issues.

The Paradyne and Hotwire series ensure interoperability with various customer premises equipment, enabling service providers to offer bundled services such as voice, video, and data over the same connection. This capability is enhanced by the units’ ability to support VLANs and QoS features, ensuring that high-priority traffic receives the necessary bandwidth.

In addition to performance, the 8620 series is built with energy efficiency in mind. By utilizing power-saving features, these units help reduce overall operational costs while still providing reliable service.

Overall, the Paradyne 8620 and Hotwire 8620 GranDSLAM are robust solutions for service providers looking to deliver high-speed broadband services. Their modular design, advanced management capabilities, and support for multiple DSL technologies make them an excellent choice for today’s demanding telecommunications environment. With these advantages, operators can effectively meet customer needs while preparing for future growth and technology advancements.
Top Page Image Contents