![](/images/new-backgrounds/1109565/109565173x1.webp)
7.8Link Fault Management.
This sections describes the mibs associated with the Automatic Protection Switching (APS), Manual Dual Link Load Sharing (DLLS) and Redundancy Features.
7.8.1Automatic Protection Switching (APS) -
This MIB objects are used to control and manage SONET linear APS architectures. The generation of APS notifications is enabled by default (apsNotificationEnable).
The object pdnLinkFaultMgmtApsSelection is used to enable/disable APS in the device. By default this object is disabled.
Table 1-87. pdnLinkFaultMgmtApsSelection
Table | Comments |
|
|
apsConfigEntry | Supported as is except for the special cases indicated here. |
|
|
apsStatusEntry | Supported as is |
|
|
apsMapEntry | Supported as is |
|
|
apsChanConfigEntry | Supported as is except for the special cases indicated here. |
|
|
apsCommandEntry | Supported as is |
|
|
apsChanStatusEntry | Supported as is |
|
|
apsNotificationEnable | Supported as is |
|
|
The following subsections highlights special cases and/or limitations on the support of some objects in these tables.
7.8.1.1apsConfigMode.
This object allows configuration of the APS mode. Only the following two values are to be supported: onePlusOne(1) and oneToN (2).
7.8.1.2apsConfigRowStatus
This object is supported
7.8.1.3apsChanConfigRowStatus
This object is supported
7.8.1.4apsConfigExtraTraffic.
This object enables or disables the transfer of extra traffic on the protection channel in a 1:n architecture. This object will be supported
November 2003 | 81 |