Paradyne 8620, 8820 DS1 MIB RFC 2495 -32. DS1 MIB Comments, Paradyne DS1-EXT MIB PDN-DS1EXT-MIB

5.5DS1 MIB (RFC 2495) Table 1-32. DS1 MIB

Table	Comments
dsx1ConfigEntry	Supported as is
dsx1CurrentEntry	Supported as is
dsx1IntervalEntry	Supported as is
dsx1TotalEntry	Supported as is
dsx1ChanMappingEntry	Supported as is
dsx1FarEndCurrentEntry	Supported as is
dsx1FarEndIntervalEntry	Supported as is
dsx1FarEndTotalEntry	Supported as is

5.6Paradyne DS1-EXT MIB (PDN-DS1EXT-MIB).

This Paradyne MIB is an extension to the standard DS1 MIB (RFC 2495). This MIB provides additional DS1 and G.703 (E1) configuration objects not provided by RFC 2495.

The various objects supported are shown in the following table.

Table 1-33. DS1-EXT MIB

Table	Comments
pdnDs1ExtConfTable	Supported objects:
	pdnDs1ExtConfLineLengthType
	pdnDs1ExtConfLineLength
	pdnDs1ExtConfLineBuildOut
	pdnDs1ExtConfConnector

5.6.1pdnDs1ExtConfLineLengthType (RW):

This entry specifies the type of loop length for the interface. The posibble values are shortHaul(1), longHaul(2). short-haul is intended for intra-building use. long-haul is intended for inter-building use. The default value is long-haul.

5.6.2pdnDs1ExtConfLineLength (RW):

This entry specifies the loop length, in feet, for a short-haul DS1 line. This object only applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with the pdnDs1ExtConfLineBuildOut object. Only one of the two can be used for configuration at a time, based on the pdnDs1ExtConfLineLengthType object. The default value is feet000To133.

8000-A2-GB30-10 November 2003 37