Operation
3-68 3160-A2-GB21-80
March 1999
Changing User Interface Access Security
Procedure
To change user interface access security:
1. Press the key two times from the top-level screen.
F1
DSU ESF
Stat Test Cnfig
F2 F3
2. Press the key three times.
F1
DSU ESF
Stat Test Cnfig
F2 F3
3. Press the key once.
F1
DSU ESF
Stat Test Cnfig
F2 F3
The Security screen appears.
F1
Security:
Lvl1 Lvl2
F2 F3
4. Press F1 to select Lvl1, or press F2 to select Lvl2. After you make a
selection, the top-level screen appears.
If you do not make a selection within 5 minutes, the Automatic Device
Health/Status screen appears.