Paradyne 3160, 3164, and 3165 Individual Channel Assignment Method

Operation
3-41
3160-A2-GB21-80 March 1999
4. The Start At screen displays the configuration option used to select the
starting DS0 channel. If the destination selected is the network interface, then
the network channels appear on the screen. If the destination selected is the
DTE Drop/Insert (DSX-1) interface, then these channels appear on the
screen.
The following screen shows an example for the network interface. Use the
or key to scroll the desired channel onto the screen. Use the Function
keys to select the starting channel. Only those DS0 channel numbers that
provide enough bandwidth (based on the configured data rate) to be used as
a starting channel number are displayed. Channel allocation for this port can
only be cleared by selecting Clear.
F1
Start At:Clear
Next Clear N1
F2 F3
Individual Channel Assignment Method
The Assign By configuration option screen appears after you select a port.
Procedure
To assign by the individual channel method:
1. Press the key once to bring the Chan selection onto the screen.
F1
Assign By:Block
Next Block ACAMI
F2 F3
2. Press F3 (Chan).
F1
Assign By:Chan
Block ACAMI Chan
F2 F3
3. Press F1 (Next) to display the next configuration option (channel allocation).