Paradyne manual TAM1500-12 Circuit Configuration, Data Storage, Speed

Management System Configuration Defaults

IP Addresses:		Subnet Mask:	255.255.255.0
IPD12000 slot 13	192.168.254.252	Default Gateway:	0.0.0.0
IPD12000 slot 14	192.168.254.253	In-band Management:	disabled
IPD4000 slot 5	192.168.254.252	Uplink VLAN ID:	0

TAM1500-12 Circuit Defaults

Circ. ID:	n/a	Pri [Priority]:	0
IP Range 1:	0.0.0.0 - 255.255.255.255	Flood:	Upl [Uplink]
IP Range 2:	0.0.0.0 - 0.0.0.0	Frame Type:	ESF [Extended Super Frame]
Speed:	1,536 kbps	Line Code:	B8ZS [Bipolar with 8 Zero Substitution]
Protocol:	ALL	Tx Buildout:	0dB [decibels]
Backbone-VLAN:	0	Clock Source: Local
VLAN:	0 - 0

Data Storage

Configuration backup is inherent in the TAM1500-12. Upon initial power up of the IP DSLAM, the default parameters of the TAM1500-12 will remain in place unless changed through NMS. Once changed, new configurations will automatically be recorded in the Random Access Memory (RAM) of the TAM1500-12 and the Non-Volatile Random Access Memory (NVRAM) of the MUM. While data stored in TAM1500-12 RAM will be erased if the unit loses power, data stored within MUM NVRAM will remain intact (even if the unit loses power) unless deliberately cleared or reconfigured.

TAM1500-12 CIRCUIT CONFIGURATION

Circuit configurations common to all Access Module models are defined in the Management User Guide for IP and Mini DSLAMs. Circuit configurations specific to T1 technology are outlined below. Default settings for any of these may be altered via the Circuit Configuration window of Net to Net's Network Management System (NMS).

Speed

There are eight timeslot/bandwidth options for the T1 link; default is 1,536 kbps across all 24 channels. Remote T1 modems determine line speed through their communication with the TAM1500-12.

TAM1500-12 Timeslot & Bandwidth Options

Timeslots 1-3 1-6 1-9 1-12 1-15 1-18 1-21 1-24

Bandwidth (kbps) 192 384 576 768 960 1,152 1,344 1,536

210-0000025 rev04