T1 TX | flashing | T1 activity | The port is transmitting data to the remote |
(Transmitting) | amber |
| T1 modem. |
| solid amber | heavy Tx traffic | The port is transmitting large amounts of |
|
|
| data to the remote T1 modem. |
| no | no activity | A link may exist but the port is not |
| illumination |
| transmitting any data to the remote T1 |
|
|
| modem. |
|
|
|
|
|
|
|
|
T1 AL (Alarm) | no | T1 is operational |
| illumination |
|
| solid amber | Yellow Alarm |
|
| The outgoing connection from the |
|
| port has been lost; no data is being |
|
| transmitted. |
| pulsing | Blue Alarm |
| amber | An indirect connection has been lost; |
|
| the port may no longer be receiving |
|
| data from the remote T1 modem. |
|
|
|
Note: If the T1 LK LED also remains unlit then the port is in Red Alarm.
The remote T1 modem has lost its incoming connection and is in Red Alarm.
The remote T1 modem has lost a connection with an intermediate device and is in Red or Yellow Alarm.
(A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rapid, less constant rate.)
Regulatory Compliance
FCC Regulatory Compliance Information for Class A Equipment
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
FCC Regulatory Compliance Information for T1 Equipment
Note: This equipment complies with Part 68 of the FCC rules and bears a label that contains the FCC registration number. This information must be provided to the telephone company if requested. This equipment should be connected to the telephone network or premise wiring using compatible modular plugs and cabling in compliance with the requirements of Part 68 of the FCC rules, using the following standard jack types: (1)
In the unlikely event that this equipment harms the telephone network, the telephone company can temporarily disconnect your service. The telephone company will try to warn you in advance of any such disconnection, but if advance notice isn’t practical, it may disconnect the service first and notify you as soon as possible thereafter. In the event such a disconnection is deemed necessary, you will be advised of your right to file a complaint with the FCC. Additionally, the telephone company may, from time to time, make changes in its facilities, equipment, or operations that could affect the operation of this equipment. If this occurs, the telephone company is required to provide you with advance notice so you can make the modifications necessary to maintain uninterrupted service.
