![CONNECTING THE A 23 TO TRIGGER ANOTHER COMPONENT](/images/new-backgrounds/17668/1766823x1.webp)
9 | CONNECTING THE A 23 TO TRIGGER ANOTHER COMPONENT |
|
|
Whenever the A 23 is turned on either manually or automatically, there is 12 Vdc present at its own DC Trigger Out jack so it can trigger additional amplifiers or other components on and off.
What You’ll Need:
•A cable with a 2.5 mm
•A component that can be triggered with an external +9 Vdc to +12 Vdc source. The A 23 DC Trigger output provides up to 150 mA of current
2.5 mm
Before Connecting
Remove power to all the components in your audio system.
To Connect
1Plug one end of the trigger wire into the 12V Out jack on the A 23.
2Plug the other end of this wire into the component that you want the A 23 to trigger.
1 |
C A U T I O N |
2
Input
CONTROL COMPONENT
YOU SHOULD KNOW
If the device you want to use to control your A 23 doesn’t have a 2.5 mm trigger output connector, you can cut one plug off the cable and terminate the end as required. The lead with the red stripe is positive and the lead without the white stripe is negative.