Parasound AVC-2500 owner manual Rear Panel Connections, patible with typical analog line level

Rear Panel Connections

1. Audio/Video 1-6 Analog Inputs

All six audio/video analog inputs are com-

patible with typical analog line level

sources. Connect the left and right ana-

4. 5.1 Analog Inputs

The 5.1 Analog Input connections accept six channels of processed analog output of a DVD player or processor with dis- crete outputs. Connect the six discrete outputs of your source component to the corresponding 5.1 Analog inputs of the

DC Triggers

These DC Trigger outputs provide +12 Volt DC trigger to activate equipment such as power amplifiers or relays. Connect these outputs to the DC input of the com- ponent you want to activate.

13. Component Video Inputs

Each of the two component video inputs have three separate connections. Connect the component video outputs of your DVD player, VCR, etc. to the Component Video inputs of the AVC-2500.

log audio output of your audio/video

source components to these inputs.

2. Video 6 Record

Use the Video 6 input and output for the VCR you intend to use for recording. Connect the left and right Video 6 Record output jacks to the Record/Input jacks of your VCR. Next, connect the Video 6 Record output to the video input of your VCR.

Zone Outputs

The Zone audio and video output connec- tions provide independent remote zone operation. Connect the left and right Zone audio output to your remote zone ampli- fier and connect the video output to your remote zone monitor.

3.Audio-Only 1-6 Analog Inputs

All six analog audio-only inputs are com- patible with typical analog line level sources. Connect the left and right ana- log audio output of your audio source components to any of these six audio-only inputs.

11

AVC-2500.

5. Record Outputs

Connect the left and right Record output jacks of the AVC-2500 to the Record/In- put jack of your analog recording com- ponent.

6. Main Outputs

The AVC-2500 provides a stereo output pair for the Left and Right front and Sur- round speakers, two monaural outputs for the Subwoofer, and a single monaural out- put for the center speaker. Connect these outputs to the inputs of your power am- plifiers.

7. AC Line Cord Receptacle

The rear panel mounted IEC standard AC receptacle accepts the supplied AC cord. Plug the female end into the rear mounted AC receptacle and connect the male end to an uninterrupted AC power line.

8. Control Connections

Infrared Inputs

The Main and Zone external infrared in- puts provide infrared remote control op- eration in the main and remote zones. Connect the output of a compatible in- frared repeater system to these inputs.

Audio Trigger

This connector provides an audio trigger to activate equipment such as power am- plifiers or relays. Connect this output to the audio sensing input of the component you want to activate.

9. Digital Outputs

Connect the 75 Ω Coaxial or Optical digi- tal record outputs to the digital input of your digital recording component.

10.Antenna Input Connections

Connect your antennas to these inputs. Antennas are provided, but you can use other antennas for improved reception.

11.RS-232 Control Port

The RS-232 External control port pro- vides a control and feedback interface for software based control systems.

12.Component Video Outputs

Component Video outputs have three separate connections. Y is for luminance and Cb and Cr are for the color differ- ence signals. Connect the three compo- nent Monitor output connectors of your AVC-2500 to the input connector of your monitor or projector.

14. Digital Inputs

Your AVC-2500 has seven digital inputs: four 75 Ω digital coaxial inputs, two fi- ber-optic Toslink inputs, one balanced AES/EBU, and a connector for an op- tional RF demodulator. Connect the digi- tal outputs of your source equipment to these inputs.

15. Video Monitor Outputs

Both composite and S-video have output connections with and without on-screen display. Connect the Composite and S- Video Monitor output connectors to the input connector of your monitor or pro- jector.

16.Composite and S-Video Inputs

Each of the six Audio/Video Inputs has both composite and S-video connectors with separate video circuits and amplifi- ers. The AVC-2500 can only convert video signals from S-video to composite video, but not vice versa. For example, when you connect a video signal to one of the six RCA composite RCA input jacks, the video signal will only be avail- able through the RCA composite Moni- tor and Record output jacks.